Duracell Mygrid Starter Kit - 1-Count

Eliminate cord clutter

myGrid can charge up to four devices at once using a single cord and outlet, getting rid of the mess of multiple cords. Since myGrid is as fast as standard chargers based on USB 2.0, it?s an efficient way to charge multiple devices.

Drop-and-go charging for up to four devices at once

Power up to four myGrid-enabled devices, such as Blackberry®, HTC®, Motorola® or Apple® phones, on myGrid at the same time. A blue indicator light lets you know that your devices are charging.

Ultra-slim profile

myGrid doesn?t take up a lot of space, making it ideal for counter tops, nightstands or any other flat surface near an electrical outlet. The pad measures 6.75" x 8.5" and the actual charging surface is less than 1/8" thick.

Safe to Touch

A blue indicator light turns on when your devices receive power. myGrid is safe to touch?the charging surface and light automatically turn off if your fingers, keys, or coins come in contact with it. When not in use, myGrid will be in Sleep Mode, in which the charging surface and the indicator light both turn off.

Enable your devices

myGrid is easy to use. To start charging, you must first install a Power Clip™ or Power Sleeve™ to your compatible device. Then, simply drop your device on myGrid to charge.

Installing and using the Power Clip

Step 1

Insert the proper tip into the device's charging port. Press the tip into the charging port and ensure a proper fit.

Step 2

Place the Power Clip on the tip and make sure the two are sealed together properly, then swivel the Power Clip over the center of the phone and press firmly into place (remove the adhesive backing on the Power Clip prior to installation).

Step 3

Place the device on myGrid, making sure that it rests fully on the pad. The blue indicator light will appear on myGrid when the device is being charged properly.

Installing and using the Power Sleeve

Step 1

Carefully insert your device into the Power Sleeve.

Step 2

Use your fingers to stretch the Power Sleeve over the top of the device.

Step 3

Place the device on myGrid, making sure that it rests fully on the pad. The blue indicator light will appear on myGrid when the device is being charged properly.